Is it hard to install your own curtains? This article will teach you how to install your own curtains.
Curtains are often expensive and hard to install, so many people will hire a professional to do it for them. This is great if money isn’t an object or you don’t want the hassle. But fortunately, there is a cheaper and easier way: DIY curtains!
There are lots of ways to install curtains: you can use curtain clips, hanging rods, or even hang them from nails hammered into your walls. However, this article discusses the easiest method, which I’ve found is using tension rods.
The first step in any project is to determine what sort of look you want for your room and to purchase the right kind of curtain. In this case, assume that you want simple rods and rings for your curtains, but this guide can be adapted for other types of window dressing such as pocket-back curtains or tab top curtains.
Tension rods are very cheap and they make hanging curtains very easy, even if you don’t have any experience at all with installing things like this. Plus they’re not bulky so you can keep your blinds on the same rod without it looking ugly or taking up too much room.
They are also available in many different sizes, so you can choose one to fit your window perfectly. I recommend you buy one that’s slightly wider than the window itself because otherwise, the curtains might fall off if they’re too small for it.
Tension rods are very easy to install – just follow these steps:
1. Measure the window
2. Cut the curtain to size, then hem each side
3. Install your tension rod and you’re done!
I hope this article about installing curtains has helped you out – good luck with it!
So it easy to install curtains all by yourself. You can save a lot of money by installing your own curtains. Installation is usually as easy as putting up a picture on the wall, and there are often no special tools required.